Hi,
this thermal and humidity sensor works perfectly fine in Smart Home, but doesn't get exposed over matter:
bfb167e8fe5bdb7adfmbtn
Using Zemismart M1 bridge.
Is this the right place to ask for the sensor to be exposed? Can you enable this sensor?
wmbauer 2024年 Jul 16日 03:54Hi,
this thermal and humidity sensor works perfectly fine in Smart Home, but doesn't get exposed over matter:
bfb167e8fe5bdb7adfmbtnUsing Zemismart M1 bridge.
Is this the right place to ask for the sensor to be exposed? Can you enable this sensor?
Hi, we have enable this sensor, first you delete it, then add it again.thanks.
Thank you very much for your very quick support!
Unfortunately the wrong numbers are being reported: temperature 2,91 degrees celsius, humidity 0,55%. Should be 29,1 degrees, 55%.
wmbauer 2024年 Jul 16日 15:09Thank you very much for your very quick support!
Unfortunately the wrong numbers are being reported: temperature 2,91 degrees celsius, humidity 0,55%. Should be 29,1 degrees, 55%.
Sorry, could you please test it again? If the issue still exists, please tell me. Thank you.
Thank you. Temperature is fine now, humidity wrong by the factor of 10 (reads 5,2% instead of 52%).
wmbauer 2024年 Jul 16日 21:35Thank you. Temperature is fine now, humidity wrong by the factor of 10 (reads 5,2% instead of 52%).
it is all right now, you could test again. thanks.
Thank you very much, it's perfectly fine now!
Update:
Another thermal sensor which isn't being exposed at all:
bf62f9cc1ca02ec733caz6
Temperature, humidity, battery charge would be great if it would work over Matter!
wmbauer 2024年 Aug 3日 01:46Update:
Another thermal sensor which isn't being exposed at all:
bf62f9cc1ca02ec733caz6Temperature, humidity, battery charge would be great if it would work over Matter!
you can add the device again, then test it.thanks.
Thank you. It appears now, but with wrong/strange values:
humidity: 40% (should be over 60)
temperature: 20°C (should be 24°C)
Tuya app shows correct values.