Re: Tasmota - 4 relay board
Posted: 2025年 May 12日 17:12
Yes, i has Gateway, same as Vamp.
Page 2 of 4
Re: Tasmota - 4 relay board
Posted: 2025年 May 12日 20:36
huangxh 2025年 May 12日 10:05Thank you for your feedback. If you want to control these devices from an external network, you will need a Tuya gateway.
I have a gateway. A Matter ZigBee Hub (THP10-Z-X)
ID: bf211f6985abed2bbensnl
Re: Tasmota - 4 relay board
Posted: 2025年 May 13日 05:18
I try to reconnect the device. here the new ID-s:
Matter网关兜底(bfb4524uyrhcsehb)
W20-UBEA 4(bf0bd94b089a068d288ztg)
W20-UBEA 2(bf6eeffd17e40c0b30cgze)
W20-UBEA(bf9a102e30cedfe039xziz)
W20-UBEA 3(bfeaf6f502ac01b543kuks)
Re: Tasmota - 4 relay board
Posted: 2025年 May 14日 13:44
you can update the gateway to version 1.13.4, then test again.thanks.
Re: Tasmota - 4 relay board
Posted: 2025年 May 15日 00:23
@huangxh
updated info:
I successfully update the gateway. Now i able to switch on the relay remotely, but the state are not refresh in app. It also the same problem in local network (the old gateway firmware, locally work well)
I re-connect the device, here the new IDs:
W20-UBEA 3 (bf255a5a6445c714a3niqw)
W20-UBEA (bf7ef5a8b731e8f696ryft)
W20-UBEA 2 (bfa4945e715d0fb8df4ess)
W20-UBEA 4 (bfbfa957fcfa302607cxoe)
Matter网关兜底 (bfc6311on1yieb1t)
Further test:
I make two tap to run automation.
- tap it to on one of relay on tasmota matter board
- tap it to off one of relay on tasmota matter board
Both of them are working! so it send the on / off comand. also say that if i run "on" automation, i not get confirmation but i run "off" i get it:
see the pictures:
Re: Tasmota - 4 relay board
Posted: 2025年 May 23日 18:18
Vamp 2025年 May 15日 00:23@huangxh
updated info:
I successfully update the gateway. Now i able to switch on the relay remotely, but the state are not refresh in app. It also the same problem in local network (the old gateway firmware, locally work well)
I re-connect the device, here the new IDs:
W20-UBEA 3 (bf255a5a6445c714a3niqw)
W20-UBEA (bf7ef5a8b731e8f696ryft)
W20-UBEA 2 (bfa4945e715d0fb8df4ess)
W20-UBEA 4 (bfbfa957fcfa302607cxoe)
Matter网关兜底 (bfc6311on1yieb1t)Further test:
I make two tap to run automation.
- tap it to on one of relay on tasmota matter board
- tap it to off one of relay on tasmota matter board
Both of them are working! so it send the on / off comand. also say that if i run "on" automation, i not get confirmation but i run "off" i get it:
see the pictures:
Could you test it again: turn off/on the device, then let me know the test time. Thank you.
Re: Tasmota - 4 relay board
Posted: 2025年 May 24日 06:28
Do it now.
2025.may.23
22.26 UTC
Re: Tasmota - 4 relay board
Posted: 2025年 May 26日 11:13
Sorry, it was the weekend the other day and the log was overwritten. Could you try again today? Due to the time difference, you could try earlier in the morning there, while I should be able to check it immediately in the afternoon here.
Re: Tasmota - 4 relay board
Posted: 2025年 May 27日 13:20
huangxh 2025年 May 26日 11:13Sorry, it was the weekend the other day and the log was overwritten. Could you try again today? Due to the time difference, you could try earlier in the morning there, while I should be able to check it immediately in the afternoon here.
Ok done. I try to switch it.
2025.05.27 05:18 UTC
Re: Tasmota - 4 relay board
Posted: 2025年 May 27日 13:57
Vamp 2025年 May 27日 13:20huangxh 2025年 May 26日 11:13Sorry, it was the weekend the other day and the log was overwritten. Could you try again today? Due to the time difference, you could try earlier in the morning there, while I should be able to check it immediately in the afternoon here.
Ok done. I try to switch it.
2025.05.27 05:18 UTC
I haven't seen your control records. Could you control it via the external network instead of the local network? Also, please tell me which device is being controlled? Thank you!