Top

【技术干货】TuyaOS(NB-IoT)新平台移植指导:适配tkl_nbiot_ril.c

Lte-Cat.1/Cat.4/Cat.M设备，NB-IoT设备等
Post Reply
liujt@tuya.com
Posts: 35

本章介绍对tkl_nbiot_ril.c的接口相关适配

  • Code: Select all

      /**
  * @brief ril驱动初始化
  * 
  * @param[in] null
  *
  * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
  */
OPERATE_RET tkl_nbiot_ril_init(VOID)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    ril层驱动初始化，在这里可以初始化后续需要用到的互斥锁及相关的一些信息

  • Code: Select all

    /**
  * @brief 注册事件回调
  * 
  * @param[in] evt_cb ：注册的相关事件回调函数
  * @param[in] evt_id ：事件定义
  *
  * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
  */
 OPERATE_RET tkl_nbiot_ril_register_event_callback(TKL_RIL_EVENT_SEND_T evt_cb, TKL_RIL_EVENT_ID_T *evt_id)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    ril层相关事件回调注册，主要包括成功识别及未识别到sim卡，网络附着成功及网络断开，网络附着被基站拒绝等事件，具体事件类型参考枚举TKL_RIL_EVENT_ID_T。

  • Code: Select all

    /**
 * @brief 查询ril层网络附着状态（建议异步处理）
 * 
 * @param[in] null
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_attach_event_inquire(VOID)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}
/**
 * @brief 查询ril层网络附着状态（建议异步处理）
 * 
 * @param[in] null
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_attach_event_inquire(VOID)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    由于有些情况下平台侧不会主动上报基站附着成功事件，所以SDK需要主动查询是否已经成功附着上基站。建议不要做任何等待，立即返回，通过发送事件异步处理。

  • Code: Select all

    /**
 * @brief 获取当前设备是否识别到sim卡
 *
 * @return BOOL_T true: 识别到卡 false: 未识别到卡
 */
 BOOL_T tkl_nbiot_ril_is_sim_ready(VOID)
{
    // --- BEGIN: user implements ---
    return 0;
    // --- END: user implements ---
}

    由于有些情况下平台侧不会主动上报成功识别到SIM事件，所以SDK需要主动查询是否已经成功识别SIM。

  • Code: Select all

    /**
 * @brief 获取当前设备cesq相关参数（建议阻塞处理）
 * 
 * @param[inout] info ：获取当前设备cesq相关参数
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_cesq(TKL_RIL_CESQ_T *info)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    查询CESQ相关参数

  • Code: Select all

    /**
* @brief 获取设备的T3324时间（建议阻塞处理）
* 
* @param[inout] t3324：返回获取的设备的T3324值，单位：s
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_get_t3324(UINT_T *t3324)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    查询当前active time T3324的值，换算成为秒为单位的值返回

  • Code: Select all

    /**
* @brief 获取设备的T3412时间（建议阻塞处理）
* 
* @param[inout] t3412：返回获取的设备的T3412值，单位：s
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_get_t3412(UINT_T *t3412)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    查询当前周期TAU T3412的值，换算成为秒为单位的值返回

  • Code: Select all

    /**
 * @brief 设置设备的T3412时间（建议阻塞处理）
 * 
 * @param[in] req_time ：待设置设备的T3412时间，单位：s
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_set_t3412(UINT_T req_time)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    设置当前周期TAU T3412的值，输入req_time是以秒为单位的指定值

  • Code: Select all

    /**
* @brief 设置设备的T3324时间（建议阻塞处理）
* 
* @param[in] req_time ：待设置设备的T3324时间，单位：s
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_set_t3324(UINT_T req_time)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    设置当前active time T3324的值，输入req_time是以秒为单位的指定值

  • Code: Select all

    /**
* @brief 设置当前的网络接入APN名称（建议阻塞处理）
* 
* @param[in] apn_name ：设置当前的网络接入APN名称.
* @param[in] pdp_type : 分组数据协议的类型,"IP",IPV6","IPV4V6","Non-IP"
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_set_apn(PCHAR_T apn_name, PCHAR_T pdp_type)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    设置当前的网络接入APN名称及分组数据协议类型

  • Code: Select all

    /**
 * @brief 获取当前的网络接入APN名称（建议阻塞处理）
 * 
 * @param[inout] apn 返回获取的当前的网络接入APN名称
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_apn(PCHAR_T apn)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输出参数apn为已经提供内存空间的字符指针起始地址

  • Code: Select all

    /**
 * @brief 获取设备接收信号强度值rssi（建议阻塞处理）
 * 
 * @param[inout] out_rssi 返回的信号强度（为带符号的整型，理论上0为最强,一般为负值）
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_rssi(INT_T *out_rssi)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    获取当前的RSSI，建议从获取CESQ的rsrp中转换，得到dBm单位的RSSI返回值。

  • Code: Select all

    /**
 * @brief 获取当前设备的IMSI（建议阻塞处理）
 * 
 * @param[inout] imsi 获取当前设备的IMSI
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_imsi(PCHAR_T imsi)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输出参数imsi为已经提供内存空间的字符指针起始地址

  • Code: Select all

    /**
 * @brief 获取当前设备的iccid（建议阻塞处理）
 * 
 * @param[inout] iccid 获取当前设备的iccid
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_iccid(PCHAR_T iccid)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输出参数iccid为已经提供内存空间的字符指针起始地址

  • Code: Select all

    /**
 * @brief 获取相关的国家码及运营商信息（建议阻塞处理）
 * 
 * @param[in] plmn_info 获取到的plmn信息
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_plmn_info(TKL_RIL_PLMN_T *plmn_info)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    附着上基站后，SDK读取当前的MCC及MNC信息

  • Code: Select all

    /**
* @brief AT CFUN设置（建议阻塞处理）
* 
* @param[in] val ：待设置的CFUN的参数，参考AT CFUN
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_set_cfun(UCHAR_T val)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输入val符合标准3GPP协议

  • Code: Select all

    /**
* @brief 获取当前AT CFUN参数（建议阻塞处理）
* 
* @param[inout] val:返回的当前CFUN参数
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_get_cfun(INT_T *val)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输出val符合标准3GPP协议

  • Code: Select all

    /**
* @brief 获取当前rf是否校准（建议阻塞处理）
* 
* @param[inout] flag:返回的flag,1 已校准，否则未校准
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_get_rf_flag(INT_T *flag)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    产测用于判断RF是否校准

  • Code: Select all

    /**
* @brief 将IMEI写入原厂NV
* 
* @param[in] imei ：将设置的IMEI字符串指针
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_set_imei(PCHAR_T imei)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    设置imei

  • Code: Select all

    /**
 * @brief 从原厂NV获取实际的IMEI
 * 
 * @param[inout] buf : imei string buffer 
 * @param[in] len : buffer length
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_imei(PCHAR_T buf, UCHAR_T len)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    输出参数buf为已经提供内存空间的字符指针起始地址

  • Code: Select all

    /**
* @brief 根据3GPP标准释放RRC，提前退出网络连接态
* 
* @param[in] null
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_release_rrc(VOID)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    根据3GPP标准释放RRC，提前退出网络连接态
    目前默认是SDK发送完一个上行包后就立刻释放RRC

  • Code: Select all

    /**
 * @brief 设置频点（建议阻塞处理）
 * 
 * @param[in] band_array_str ：待设置的频带，格式举例:'3,5,8'
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_set_band(PCHAR_T band_array_str)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    设置当前设备支持的所有频段，注意band_array_str格式

  • Code: Select all

    /**
* @brief 获取设备当前的频点（建议阻塞处理）
* 
* @param[inout] pbuf : string buffer，输出格式举例:'3,5,8' 
* @param[in] len : buffer length
*
* @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
*/
OPERATE_RET tkl_nbiot_ril_get_band(PCHAR_T pbuf,  UCHAR_T len)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    len小于8时，获取当前的工作频段；否则获取设备支持的所有频段

  • Code: Select all

    /**
 * @brief PSM模式配置，效果参考at+cpsms中psm开关（建议阻塞处理）
 * 
 * @param[in] enable : 1，使能；0，失能 
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_psm_mode_enable(UCHAR_T enable)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    是否开启设备psm模式

  • Code: Select all

    /**
 * @brief EDRX使能/失能， 效果参考AT+CEDRXS（建议阻塞处理）
 * 
 * @param[in] enable : 1，使能；0，失能 
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_edrx_mode_enable(UCHAR_T enable)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    是否开启设备edrx模式

  • Code: Select all

    /**
 * @brief 设置指定地区网络附着的相关信息
 * 
 * @param[in] operator ：地区网络附着相关信息
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
 OPERATE_RET tkl_nbiot_ril_set_area_attach_info(TKL_RIL_ATTACH_INFO_T *operator)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    用于国内的模组可直接返回OPRT_NOT_SUPPORTED，该功能主要用于海外模组配置PLMN/BAND/APN等信息

  • Code: Select all

    /**
 * @brief 获取当前基站的id（建议阻塞处理）
 * 
 * @param[inout] pbuf : 返回当前连接基站id 字符缓存 
 * @param[in] len : buffer length
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_serving_cellid(PCHAR_T pbuf,  UCHAR_T len)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    获取当前已经连接基站cellid，pbuf为已经提供内存空间的字符指针起始地址

  • Code: Select all

    /**
 * @brief 获取设备附近基站信息（建议阻塞处理）
 * 
 * @param[inout] pbuf : 返回附近基站信息
 * @param[inout] out_num : 附近基站总数
 *
 * @return OPRT_OK on success. Others on error, please refer to tuya_error_code.h
 */
OPERATE_RET tkl_nbiot_ril_get_neightbor_cellid(TKL_RIL_NEIGHBOR_CELL_INFO_T **pbuf,  INT_T *out_num)
{
    // --- BEGIN: user implements ---
    return OPRT_NOT_SUPPORTED;
    // --- END: user implements ---
}

    返回附近临近基站信息

Post Reply