【T3-V-PRO】唤醒后语音交互失败

Wi-Fi 设备、蜂窝设备、WuKongAI、开发板、TuyaOS 移植等


Post Reply
18717770479
Posts: 2

Hi,
T3-V-PRO模组唤醒后,语音交互失败,请帮忙看看,详细日志如下:

[13:12:39:742] ty heap base: 28001B00 size: 65280
[13:12:39:742] read_manage_block: mag->blockid=255, id=0, mag->state=255.
[13:12:39:742]
read_manage_block: mag->magic=0xFFFFFFFF, rescrc=0x0, mag->crc32=0xFFFFFFFF.
[13:12:39:742]read_manage_block: mag->blockid=255, id=1, mag->state=255.
[13:12:39:742]
read_manage_block: mag->magic=0xFFFFFFFF, rescrc=0x0, mag->crc32=0xFFFFFFFF.
[13:12:39:744]_judge_ota_info checkerr0:1, checkerr1:1
[13:12:39:752]jump toxx:0x2010000
[13:12:39:766]id=0xc86516x2010000
[13:12:39:766]ate enabled is 0
[13:12:39:766]uncali sdmadc value:[0 0]
[13:12:39:766]reason - power on
[13:12:39:766]regs - 0, 0, 0
[13:12:39:766]armino rev:
[13:12:39:767]armino soc id:53434647_72360101
[13:12:39:767]bandgap_calm_in_otp=0x1d
[13:12:39:767]Intialize random stack guard.
[13:12:39:767]os time(0ms).
[13:12:39:767]base aon rtc time: 0:3
[13:12:39:767]flash id: 0x00c86516, flash size: 400000 / 4M
[13:12:39:767]go to tuya
[13:12:39:767]armino app init: Apr 2 2026 15:03:44
[13:12:39:767]APP Version: 3.0.9
[13:12:39:767]init TCP/IP
[13:12:39:770]wifi initing
[13:12:39:781]IP Rev: 802.11ax
[13:12:39:781]mm_update_bcn_loss_info: wait 0,wake 0,intv 0,prevent 5,loss_thd 200
[13:12:39:781]get rfcali_mode:1
[13:12:39:783]get temperature 515
[13:12:39:793]temp in otp is:583
[13:12:39:794]temp_code=39,dmodldosel=4,Dgmdc=7
[13:12:39:868]lpf_i & q in flash is:147, 145
[13:12:39:868]xtal in flash is:67
[13:12:39:868]xtal_cali:67
[13:12:39:868]--init_xtal = 67
[13:12:39:868]xtal inital:583, 70, 67
[13:12:39:868]gtx_dcorPA=0x10->0x10
[13:12:39:868]pwr_gain_base dft_b/g/ble=20ab7c00/a0ab7c00/20a94c00 cur_b/g/ble=20ab7c00/a0ab7c00/20a94c00
[13:12:39:869]-----pwr_gain:40, rate=54, g_idx:40, shift_b:0, shift_g:0
[13:12:39:869]idx:40=40+(0),r:54,xtal:67,pwr_gain:a0ab7128
[13:12:39:869]wifi inited(1) ret(0)
[13:12:39:869]WIFI AT CMDS INIT OK
[13:12:39:869]ble_entry run ble task with stack size 3072
[13:12:39:869]rwnx_cal_set_rfconfig(0x101) phy on; rf off
[13:12:39:871]base mac 2c:b4:71:8e:33:b6
[13:12:39:882]temp_code:39 - adc_code:518 - adc_trend:[13]:583->[16]:514
[13:12:39:882]ble mac: 2c:b4:71:8e:33:b7
[13:12:39:882]kernel_mem_init type 0 size 2684
[13:12:39:882]kernel_mem_init type 1 size 10916
[13:12:39:882]kernel_mem_init type 2 size 668
[13:12:39:882]xvr_reg_init
[13:12:39:882]h4tl_init-1 ok
[13:12:39:882]hci_init ok
[13:12:39:883]rwble_init ok
[13:12:39:883]rwip_driver_init ok
[13:12:39:883]rwip_wlcoex_set ok
[13:12:39:883]ble_thread_main cali_ready_status:0xf, ble_cali_staus: 8
[13:12:39:883]enter normal mode
[13:12:39:886]user app entry(0x2071f2d)
[13:12:39:897][01-01 00:00:00 ty D][45e][tal_thread.c:224] Thread:sys_timer Exec Start. Set to Running Stat 0x28045ed8
[13:12:39:898][01-01 00:00:00 ty I][441][tal_thread.c:200] thread_create name:sys_timer,stackDepth:4096,totalstackDepth:4096,priority:5
[13:12:39:898][01-01 00:00:00 ty I][441][tal_thread.c:200] thread_create name:wq_system,stackDepth:6144,totalstackDepth:10240,priority:3
[13:12:39:899][01-01 00:00:00 ty I][441][tal_thread.c:200] thread_create name:wq_highpri,stackDepth:5120,totalstackDepth:15360,priority:4
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_tls.c:939] TLS version: mbed TLS 3.1.0
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_svc_netmgr_linkage.c:72] link[9] is registered [0]
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_svc_netmgr_linkage.c:72] link[2] is registered [1]
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:0
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:1
[13:12:39:910][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:2
[13:12:39:912][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:3
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:4
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:5
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:6
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:7
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:8
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:114] add new node,type:9
[13:12:39:924][01-01 00:00:00 ty D][441][tuya_devos_health.c:58] init watchdog, interval: 60
[13:12:39:925]tkl_watchdog_init interval_ms(30000)!
[13:12:39:925][01-01 00:00:00 ty D][490][tal_thread.c:224] Thread:wq_highpri Exec Start. Set to Running Stat 0x280490f8
[13:12:39:925][01-01 00:00:00 ty D][441][tuya_devos_health.c:161] update type:7,period:10
[13:12:39:925][01-01 00:00:00 ty D][441][tuya_devos_health.c:554] watch_dog_interval:60, monitor_detect_interval:600
[13:12:39:927][01-01 00:00:00 ty D][4a9][tal_thread.c:224] Thread:health_monitor Exec Start. Set to Running Stat 0x2804a948
[13:12:39:938][01-01 00:00:00 ty I][441][tal_thread.c:200] thread_create name:health_monitor,stackDepth:3072,totalstackDepth:18432,priority:5
[13:12:39:938][01-01 00:00:00 ty I][441][mqc_app.c:544] mqc app init ...
[13:12:39:938][01-01 00:00:00 ty E][441][mqc_app.c:130] handler cnt is zero
[13:12:39:938][01-01 00:00:00 ty D][441][mqc_app.c:123] mq_pro:5 cnt:1
[13:12:39:939][01-01 00:00:00 ty D][441][mqc_app.c:123] mq_pro:31 cnt:2
[13:12:39:939][01-01 00:00:00 ty D][441][tuya_svc_online_log.c:291] svc online log init success
[13:12:39:940][01-01 00:00:00 ty E][441][log_seq.c:930] logseq empty
[13:12:39:951][01-01 00:00:00 ty N][441][tuya_device.c:155] < TuyaOS V:3.12.27 BS:40.00_PT:2.3_LAN:3.5_CAD:1.0.5_CD:1.0.0 >
[13:12:39:951]< BUILD AT:2026_03_30_18_33_bk_value:0, ty_value:0
[13:12:39:952][01-01 00:00:00 ty N][441][tuya_device.c:156] reset_reason:0
[13:12:39:954][01-01 00:00:00 ty N][441][tuya_device.c:157] t3_audio_common_user_config_ty sw ver:3.0.9
[13:12:39:964][01-01 00:00:00 ty N][441][ty_gfw_ai.c:716] start gfw audio hardware init
[13:12:39:964]ckmn calib rc32k thread start
[13:12:39:964]
[13:12:39:964]$wakeup
[13:12:39:966]rosc calib complete 69 228
[13:12:39:973][01-01 00:00:00 ty I][441][tal_thread.c:200] thread_create name:gfw_core,stackDepth:4096,totalstackDepth:22528,priority:4
[13:12:40:048][01-01 00:00:00 ty E][380][gfw_core.c:70] ret:-23
[13:12:43:178][01-01 00:00:03 ty N][380][tdd_comm_audio.c:187] set mic gain : 26
[13:12:43:188][01-01 00:00:03 ty N][380][tdd_comm_audio.c:236] set speaker volume :50
[13:12:43:188][01-01 00:00:03 ty N][441][ty_gfw_ai.c:766] hardware init done.
[13:12:43:190][01-01 00:00:03 ty N][441][simple_flash_protected.c:87] init protected data length 1229 wr_cnt 28
[13:12:43:200][01-01 00:00:03 ty N][441][simple_flash.c:447] key_addr: 0x3d0000 block_sz 4096
[13:12:43:201][01-01 00:00:03 ty N][441][simple_flash.c:533] get key:
[13:12:43:287][01-01 00:00:03 ty N][441][tuya_tls.c:923] uni_random_init...
[13:12:43:295][01-01 00:00:03 ty N][441][tuya_tls.c:358] tuya_tls_rand_init ok!
[13:12:43:326][01-01 00:00:03 ty N][441][tuya_svc_devos.c:377] gw_cntl->gw_wsm.stat:2
[13:12:43:337][01-01 08:00:03 ty N][441][tuya_wifi_link.c:706] kv has ccode CN
[13:12:43:337]tkl_wifi_set_country_code_v2: set country code [CN]
[13:12:43:337]set country code {cc=CN, chan=<1-13> policy=manual}
[13:12:43:337][01-01 08:00:03 ty N][441][tuya_wifi_connect.c:88] fast connect mode:0
[13:12:43:337][01-01 08:00:03 ty N][441][tal_wifi_reconnet.c:203] fast connect
[13:12:43:337]tkl_wifi_station_fast_connect
[13:12:43:337]fast_connect
[13:12:43:337]phy_s_ch_w_r err,band:0,cf:255,pf:255,type:5
[13:12:43:339]mm_update_bcn_loss_info: wait 0,wake 0,intv 0,prevent 5,loss_thd 200
[13:12:43:350]phy_s_ch_w_r err,band:0,cf:255,pf:255,type:5
[13:12:43:350]phy_s_ch_w_r err,band:0,cf:255,pf:255,type:5
[13:12:43:351]phy_s_ch_w_r err,band:0,cf:255,pf:255,type:5
[13:12:43:362]phy_s_ch_w_r err,band:0,cf:255,pf:255,type:5
[13:12:43:362]mm_add_if_req: vif_idx=0, type=0, p2p=0, status=0
[13:12:43:362]State: DISCONNECTED -> INACTIVE
[13:12:43:362]State: INACTIVE -> DISCONNECTED
[13:12:43:362]mac 2c:b4:71:8e:33:b6
[13:12:43:362]update psk, scan pending 0
[13:12:43:362]No suitable network found
[13:12:43:362]State: DISCONNECTED -> INACTIVE
[13:12:43:362]auto_reconnect: count 1, timeout 0, disable_auto_reconnect_after_disconnect 1
[13:12:43:362]Setting scan request: 0.000000 sec
[13:12:43:362]wpa_supplicant_req_scan: remain count 1
[13:12:43:362]State: INACTIVE -> SCANNING
[13:12:43:362][KW:]scanu_start_req:src_id=15,vif=0,dur=0,chan_cnt=1,ssid_len=3,bssid=0xffff-ffff-ffff
[13:12:43:364][KW:]scanu_start_req:ssid=ZJB
[13:12:43:375][01-01 08:00:03 ty N][441][tuya_wifi_status.c:175] cur stat:5 0x0 -->>
[13:12:43:375][01-01 08:00:03 ty N][441][tuya_wifi_status.c:177] wifi netstat changed to:5 -->>
[13:12:43:375][01-01 08:00:03 ty N][441][mf_test.c:283] have actived over 15 min, not enter mf_init
[13:12:43:375][01-01 08:00:03 ty N][441][tuya_app_main.c:206] mf_init succ
[13:12:43:375][01-01 08:00:03 ty N][441][prod_test.c:348] have actived over 15 min, not enter mf_init
[13:12:43:377][01-01 08:00:03 ty I][441][tal_thread.c:200] thread_create name:gfw_core,stackDepth:6144,totalstackDepth:28672,priority:3
[13:12:43:387][01-01 08:00:03 ty I][441][tal_thread.c:200] thread_create name:lp_irq_task,stackDepth:2048,totalstackDepth:30720,priority:3
[13:12:43:387][RF_DEBUG] probe rsp rx: bssid=df20:e973:8047:00:00:00, rssi=-30
[13:12:43:387][01-01 08:00:03 ty N][441][ty_gfw_ai.c:773] start gfw audio agent init
[13:12:43:388][01-01 08:00:03 ty N][441][ty_gfw_ai.c:420] type:1, mode:2, trigger_io:64, spk_io:64, wkt:30, vtype:0, asr:0, vol_in_io:64, vol_de_io:64, vol_mute_io:64, mt:60
[13:12:43:388][01-01 08:00:03 ty E][441][ty_gfw_ai.c:435] module self handle should set solution code
[13:12:43:388][01-01 08:00:03 ty I][441][tal_thread.c:200] thread_create name:prompt player,stackDepth:2048,totalstackDepth:32768,priority:2
[13:12:43:388]tkl_system_malloc big memory, size(4608)!
[13:12:43:388][01-01 08:00:03 ty N][441][tdd_comm_audio.c:236] set speaker volume :80
[13:12:43:395][01-01 08:00:03 ty I][441][tal_thread.c:200] thread_create name:audio_upload_mgr,stackDepth:2048,totalstackDepth:34816,priority:2
[13:12:43:407][RF_DEBUG] probe rsp rx: bssid=df20:e973:8047:00:00:00, rssi=-33
[13:12:43:407][KW:]scanu_confirm:status=0,req_type=0,upload_cnt=2,recv_cnt=2,time=42463us,result=1,null 0
[13:12:43:407]Scan completed in 0.040000 seconds
[13:12:43:407]get scan result:1
[13:12:43:407]State: SCANNING -> ASSOCIATING
[13:12:43:408][KW:]conn vif0-0,auth_type:0,bssid:df20-e973-8047,ssid:ZJB,is encryp:8.
[13:12:43:408]chan_ctxt_add: CTXT0,freq2417MHz,bw20MHz,pwr127dBm
[13:12:43:408]chan_reg_fix:VIF0,CTXT0,type3,ctxt_s0,nb_vif0
[13:12:43:408]is connect 1,1
[13:12:43:408]mm_sta_add:vif 0,sta 0,status 0
[13:12:43:410]rc_init: station_id=0 format_mod=5 pre_type=0 short_gi=1 max_bw=0
[13:12:43:426]rc_init: nss_max=0 mcs_max=9 r_idx_min=0 r_idx_max=3 no_samples=10
[13:12:43:427]rc rates:[400 L-CCK/LP/1.0M] [2c00 HE-SU/GI3.2/MCS0] [2c01 HE-SU/GI3.2/MCS1] [2a04 HE-SU/GI1.6/MCS4] [2c04 HE-SU/GI3.2/MCS4] [2c03 HE-SU/GI3.2/MCS3] [2a05 HE-SU/GI1.6/MCS5] [2a00 HE-SU/GI1.6/MCS0] [2c09 HE-SU/GI3.2/MCS9] [2807 HE-SU/GI0.8/MCS7]
[13:12:43:427][KW:]auth_send:seq1, txtype0, auth_type0, seq4
[13:12:43:433][AUTH_DBG] send seq=1 txtype=0 auth_type=0 tx_ongoing=1 fail_cnt=0
[13:12:43:520][KW:]sm_auth_handler: status code 0, tx status 0x80800100
[13:12:43:524][KW:]assoc_req_send:is ht, seq_num:5
[13:12:43:536][RF_DEBUG] sm_tx_cfm: fail status=0x80010700, state=8, subtype=0x0, fail_cnt=0
[13:12:43:536][KW:]assoc_rsp:status0,tx_s0x80800100
[13:12:43:538][KW:]mm_set_vif_state,vif=0,vif_type=0,is_active=1, aid=0x13
[13:12:43:558]State: ASSOCIATING -> ASSOCIATED
[13:12:43:558]mm_ap_drift: clear ps, vif_bit 0x11,ps_bit 0x200
[13:12:43:559]mm_tbtt_compute:frame 3560,tim 672,tim_len 6,after_tim 2888
[13:12:43:644][KW:]sm_deauth_handler: reason code 2, state 0
[13:12:43:644][KW:]mm_set_vif_state,vif=0,vif_type=0,is_active=0, aid=0x0
[13:12:43:644]sta_del_req 0
[13:12:43:644]chan_unreg_fix:VIF0,CTXT0,nb_vif1
[13:12:43:644]is connect 0,0
[13:12:43:644]State: ASSOCIATED -> DISCONNECTED
[13:12:43:644]wpas_notify_disconnected: local_generated 0, reconnect 0
[13:12:43:644]BK STA disconnected, reason(2)
[13:12:43:646]RW_EVT_STA_CONNECT_FAILED 2
[13:12:43:661][01-01 08:00:03 ty N][490][tal_wifi_reconnet.c:341] wifi status changed to 1, stat: 1
[13:12:44:656]tkl_wifi_station_connect
[13:12:44:657]State: DISCONNECTED -> DISCONNECTED
[13:12:44:657]State: DISCONNECTED -> ASSOCIATING
[13:12:44:657][KW:]conn vif0-0,auth_type:0,bssid:df20-e973-8047,ssid:ZJB,is encryp:8.
[13:12:44:657]chan_ctxt_add: CTXT1,freq2417MHz,bw20MHz,pwr127dBm
[13:12:44:657]chan_reg_fix:VIF0,CTXT1,type3,ctxt_s0,nb_vif0
[13:12:44:657]is connect 1,1
[13:12:44:658]mm_sta_add:vif 0,sta 1,status 0
[13:12:44:658]rc_init: station_id=1 format_mod=5 pre_type=0 short_gi=1 max_bw=0
[13:12:44:661]rc_init: nss_max=0 mcs_max=9 r_idx_min=0 r_idx_max=3 no_samples=10
[13:12:44:670]rc rates:[400 L-CCK/LP/1.0M] [2c01 HE-SU/GI3.2/MCS1] [2c03 HE-SU/GI3.2/MCS3] [2808 HE-SU/GI0.8/MCS8] [2c07 HE-SU/GI3.2/MCS7] [2a04 HE-SU/GI1.6/MCS4] [2804 HE-SU/GI0.8/MCS4] [2a00 HE-SU/GI1.6/MCS0] [2c04 HE-SU/GI3.2/MCS4] [2807 HE-SU/GI0.8/MCS7]
[13:12:44:684][KW:]auth_send:seq1, txtype0, auth_type0, seq6
[13:12:44:684][AUTH_DBG] send seq=1 txtype=0 auth_type=0 tx_ongoing=0 fail_cnt=0
[13:12:44:684]sta already started, ignored!
[13:12:44:684][KW:]sm_auth_handler: status code 0, tx status 0x80800000
[13:12:44:686][KW:]assoc_req_send:is ht, seq_num:7
[13:12:44:699][KW:]assoc_rsp:status0,tx_s0x80800100
[13:12:44:699][KW:]mm_set_vif_state,vif=0,vif_type=0,is_active=1, aid=0x13
[13:12:44:701]sm_check_keepa :28.
[13:12:44:711]State: ASSOCIATING -> ASSOCIATED
[13:12:44:769]State: ASSOCIATED -> 4WAY_HANDSHAKE
[13:12:44:770]WPA: TK cb591aad70e920058c435ccaf7250d89
[13:12:44:774]update format to 2
[13:12:44:788]mm_ap_drift: clear ps, vif_bit 0x1011,ps_bit 0x200
[13:12:44:792]mm_tbtt_compute:frame 3560,tim 672,tim_len 6,after_tim 2888
[13:12:44:808]State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
[13:12:44:809]add CCMP
[13:12:44:809]State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
[13:12:44:809]WPA: GTK 156f22d88159649590ccd3c13e473491
[13:12:44:809]add CCMP
[13:12:44:809]State: GROUP_HANDSHAKE -> COMPLETED
[13:12:44:809]writed fci to flash
[13:12:44:813]configuring iface sta (with DHCP client)
[13:12:44:828][KW:]sta:DHCP_DISCOVER()
[13:12:44:829]BK STA connected ZJB
[13:12:44:831]EVENT_WIFI_STA_CONNECTED 3
[13:12:44:867][01-01 08:00:04 ty I][441][tal_thread.c:200] thread_create name:ai_client,stackDepth:4096,totalstackDepth:38912,priority:4
[13:12:44:867][01-01 08:00:04 ty N][441][tuya_ai_client.c:626] ai client init success, version:1
[13:12:44:867]tkl_system_malloc big memory, size(6144)!
[13:12:44:868][01-01 08:00:04 ty I][441][tal_thread.c:200] thread_create name:ai_agent_input,stackDepth:4608,totalstackDepth:43520,priority:4
[13:12:44:868]tkl_system_malloc big memory, size(5120)!
[13:12:44:870]tkl_system_malloc big memory, size(20496)!
[13:12:44:885][01-01 08:00:04 ty I][441][tal_thread.c:200] thread_create name:ai_agent_output,stackDepth:4096,totalstackDepth:47616,priority:4
[13:12:44:885][01-01 08:00:04 ty N][441][tuya_ai_agent.c:1256] ai agent init
[13:12:44:886][01-01 08:00:04 ty N][441][ty_gfw_ai.c:797] gfw ai init success
[13:12:44:888][01-01 08:00:04 ty N][4e9][ty_gfw_core.c:77] read baud rate 115200
[13:12:44:941][01-01 08:00:05 ty E][4e9][ty_gfw_wifi_sleep.c:391] Failed to read flash
[13:12:45:169][01-01 08:00:05 ty N][380][tdd_comm_audio.c:187] set mic gain : 26
[13:12:45:183][01-01 08:00:05 ty N][380][tdd_comm_audio.c:236] set speaker volume :80
[13:12:45:183]-- wifi lp set enable: 0, dtim:0
[13:12:45:183]set listen_int 0,the recommended value is 1,3,10
[13:12:45:183]mm_set_listen_int: set ok,set_int = 0
[13:12:45:186]mm_update_bcn_loss_info: wait 0,wake 0,intv 0,prevent 5,loss_thd 200
[13:12:45:199]----- TODO: tkl_wifi_powersave_disable 1048 -----
[13:12:45:200]ps OFF
[13:12:45:276][KW:]sta:DHCP_DISCOVER()
[13:12:45:277]update format to 5
[13:12:45:277][01-01 08:00:05 ty N][4e9][ty_gfw_wifi_dev.c:172] VER:1.0.0,mcu tp :9
[13:12:45:279][01-01 08:00:05 ty N][4e9][ty_gfw_wifi_dev.c:180] VER:2.0.0,audio tp :19
[13:12:45:292][01-01 08:00:05 ty N][4e9][tuya_iot_wifi_api.c:253] sw ver: 3.0.9
[13:12:45:294][01-01 08:00:05 ty N][4e9][tuya_wifi_link.c:108] start wifi link params validate, nc_tp:9 md:3
[13:12:45:305][01-01 08:00:05 ty N][4e9][tuya_wifi_link.c:130] gw_wsm.nc_tp:9
[13:12:45:305][01-01 08:00:05 ty N][4e9][tuya_wifi_link.c:131] gw_wsm.md:3
[13:12:45:305]bk_value:0, ty_value:0
[13:12:45:307][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:605] Last reset reason: 0
[13:12:45:317][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:434] gw_cntl->gw_if.abi:0 input:0
[13:12:45:317][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:435] gw_cntl->gw_if.product_key:ggxsp1zle74xw5hc, input:ggxsp1zle74xw5hc
[13:12:45:319][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:436] gw_cntl->gw_if.tp:9, input:9
[13:12:45:328][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:439] gw_cntl->gw_if.firmware_key:keywq7jf94cvq7tm, input:keywq7jf94cvq7tm
[13:12:45:328][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:638] enter success_proc
[13:12:45:328][01-01 08:00:05 ty N][4e9][tuya_svc_devos.c:645] serial_no:2cb4718e33b6
[13:12:45:328][01-01 08:00:05 ty N][490][tuya_bt_link.c:64] bt startup attr:ff
[13:12:45:328][01-01 08:00:05 ty N][490][tuya_ble_svc.c:1287] upd product_id type:0 ggxsp1zle74xw5hc
[13:12:45:329]tkl_hci_init
[13:12:45:330]tkl_hci_callback_register 0x21fb151 0x21f7c1d
[13:12:45:336][01-01 08:00:05 ty I][490][tal_thread.c:200] thread_create name:host_main_thread_hdl,stackDepth:5120,totalstackDepth:52736,priority:9
[13:12:45:351][01-01 08:00:05 ty I][625][ble_hs_startup.c:145] le acl buf sz = 251,max buf = 11
[13:12:45:351]
[13:12:45:379][01-01 08:00:05 ty I][625][ble_hs_hci.c:117] acl buf sz = 251, max pkt = 11, avail pkt = 11
[13:12:45:379]
[13:12:45:379][01-01 08:00:05 ty I][625][tkl_bluetooth.c:584] Stack sync
[13:12:45:379][01-01 08:00:05 ty N][490][tuya_ble_svc.c:1382] ty bt sdk init success finish
[13:12:45:379][01-01 08:00:05 ty E][490][tuya_svc_timer_task.c:1385] read timer_full_key failed
[13:12:45:380][01-01 08:00:05 ty N][490][tuya_svc_devos.c:289] __devos_init_evt success
[13:12:45:380][01-01 08:00:05 ty N][490][tuya_svc_devos.c:106] already bind
[13:12:45:381][01-01 08:00:05 ty I][490][mqc_app.c:585] mqc app start ...
[13:12:45:392][01-01 08:00:05 ty I][490][tal_thread.c:200] thread_create name:mqtt_thread,stackDepth:5120,totalstackDepth:57856,priority:4
[13:12:45:392][01-01 08:00:05 ty N][490][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 0 -> 1
[13:12:45:392][01-01 08:00:05 ty N][670][tuya_svc_mqtt_client.c:1322] mqtt_thread paused
[13:12:45:392][01-01 08:00:05 ty N][670][tuya_svc_mqtt_client.c:695] mqtt close
[13:12:45:392][01-01 08:00:05 ty E][490][astro_timer.c:326] astro timer read fail:-6
[13:12:45:395][01-01 08:00:05 ty E][490][astro_timer.c:861] read fail:-6
[13:12:45:403][01-01 08:00:05 ty I][490][tal_thread.c:200] thread_create name:lan_sock_loop,stackDepth:4096,totalstackDepth:61952,priority:3
[13:12:45:403]tkl_wifi_set_country_code_v2: set country code [CN]
[13:12:45:403]set country code {cc=CN, chan=<1-13> policy=manual}
[13:12:45:403][01-01 08:00:05 ty N][490][tuya_wifi_status.c:175] cur stat:5 0x21d6545 -->>
[13:12:45:405][01-01 08:00:05 ty I][490][ble_gap.c:2244] GAP init: stop adv
[13:12:45:413][01-01 08:00:05 ty N][490][ble_gap.c:2505] Start Adv
[13:12:45:439][01-01 08:00:05 ty N][490][tuya_ble_svc.c:1469] ble adv updated
[13:12:46:285][KW:]sta:DHCP_DISCOVER()
[13:12:46:364][KW:]sta:DHCP_OFFER received in DHCP_STATE_SELECTING state
[13:12:46:365][KW:]sta:DHCP_REQUEST(netif=0x28001a0c) sa 1
[13:12:46:424][KW:]sta:DHCP_ACK received
[13:12:46:424]writed fci to flash
[13:12:46:424]csi dhcp vif=0 src=6
[13:12:46:424]csi_sta_start 0 ret 1
[13:12:46:425]BK STA got ip
[13:12:46:425]WFE_CONNECTED 0
[13:12:46:425][01-01 08:00:06 ty N][490][tal_wifi_reconnet.c:341] wifi status changed to 0, stat: 1
[13:12:46:425][01-01 08:00:06 ty I][490][mqc_app.c:585] mqc app start ...
[13:12:46:425][01-01 08:00:06 ty N][490][tuya_wifi_status.c:175] cur stat:6 0x21d6545 -->>
[13:12:46:427][01-01 08:00:06 ty N][490][tuya_wifi_status.c:177] wifi netstat changed to:6 -->>
[13:12:46:455][01-01 08:00:06 ty N][490][tuya_wifi_status.c:181] report wifi netstat[6] to callback -->>
[13:12:46:457][01-01 08:00:06 ty N][479][tuya_svc_devos_daemons.c:316] Main Module: v1.0.0 (3.0.9)
[13:12:46:520]stop send reply net_begin_send_arp_reply
[13:12:46:521][01-01 08:00:06 ty N][670][tuya_svc_mqtt_client.c:968] connect to mqtt broker mqtts://m6.tuyacn.com:8886 port 8886
[13:12:46:522][01-01 08:00:06 ty N][670][tuya_svc_mqtt_client.c:984] mqtt client ip:192.168.1.98, link-tp:2
[13:12:46:530]tkl_net_socket_create type(0), fd(0)!
[13:12:46:562][etharp] make ip/mac static, [192.168.1.1] --- [20:df:73:e9:47:71]
[13:12:46:563]--- etharp_update_arp_entry 568: 0 2800dfc4 5
[13:12:47:380]tkl_net_socket_create type(0), fd(1)!
[13:12:47:381]tkl_net_socket_create type(1), fd(2)!
[13:12:47:388][01-01 08:00:07 ty N][45e][tuya_svc_lan.c:974] udp ip: 192.168.1.98
[13:12:47:515][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:1021] setup mqtt transporter success
[13:12:47:516][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 1 -> 2
[13:12:47:517][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:1047] send mqtt connect success
[13:12:47:526][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 2 -> 3
[13:12:47:604][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:1077] mqtt connect success
[13:12:47:604][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 3 -> 4
[13:12:47:604][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:810] mqtt topics cnt 1
[13:12:47:606][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:824] send mqtt subscribe success
[13:12:47:615][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 4 -> 5
[13:12:47:648][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:1118] mqtt subscribe success
[13:12:47:648][01-01 08:00:07 ty N][670][tuya_svc_mqtt_client.c:190] [mqtts://m6.tuyacn.com:8886] mqtt state change 5 -> 6
[13:12:47:648][01-01 08:00:07 ty N][490][tuya_wifi_status.c:175] cur stat:7 0x21d6545 -->>
[13:12:47:650][01-01 08:00:07 ty N][490][tuya_wifi_status.c:177] wifi netstat changed to:7 -->>
[13:12:47:659][01-01 08:00:07 ty N][490][tuya_wifi_status.c:181] report wifi netstat[7] to callback -->>
[13:12:47:699]----------------------------------------------------------------------------------------
[13:12:47:699]get connected ap info
[13:12:47:700]bssid: 20:df:73:e9:47:80
[13:12:47:700]security: 16, chan: 2
[13:12:47:700]psk: fb64d722f9d09feae4538f12d23fa0b928cd4b613f63061bbf2f24abc0c00010
[13:12:47:700]pwd: ****************
[13:12:47:701]ip: 192.168.1.98
[13:12:47:701]netmask: 255.255.254.0
[13:12:47:701]gw: 192.168.1.1
[13:12:47:706]dns1: 192.168.1.1
[13:12:47:718]pmf: 1, tk: cb591aad70e920058c435ccaf7250d89
[13:12:47:719]----------------------------------------------------------------------------------------
[13:12:47:810][01-01 08:00:07 ty E][490][smart_frame.c:626] devid:NULL dparr[0]:203 not find
[13:12:48:055][07-01 13:12:48 ty N][670][tuya_svc_online_log.c:253] timeout,delete uf local log
[13:12:48:062][07-01 13:12:48 ty E][479][tuya_bt_link.c:160] tuya_ble_save_beacon_key err -1
[13:12:48:370][07-01 13:12:48 ty I][45e][ble_gap.c:2244] GAP init: stop adv
[13:12:48:377][07-01 13:12:48 ty N][45e][tuya_ble_svc.c:1479] ble_sdk_send skip, serv stat:0, conn stat:4
[13:12:48:858][07-01 13:12:48 ty N][53e][tuya_ai_client.c:100] ***** ai client state 0 -> 1 *****
[13:12:48:859]tkl_system_malloc big memory, size(8572)!
[13:12:48:887][07-01 13:12:48 ty N][53e][tuya_ai_protocol.c:324] ai proto init success, sl:4
[13:12:49:144][07-01 13:12:49 ty N][53e][tuya_ai_client.c:219] connect refresh success,expire:1782886369 current:1782882769 next 3590 s
[13:12:49:145][07-01 13:12:49 ty N][53e][tuya_ai_client.c:100] ***** ai client state 1 -> 2 *****
[13:12:49:162][07-01 13:12:49 ty N][53e][tuya_ai_protocol.c:2045] connect to host[0]:106.15.180.26, port:8884
[13:12:49:162]tkl_net_socket_create type(0), fd(3)!
[13:12:49:163][07-01 13:12:49 ty N][53e][tuya_ai_client.c:100] ***** ai client state 2 -> 3 *****
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_client.c:100] ***** ai client state 3 -> 4 *****
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_client.c:100] ***** ai client state 4 -> 5 *****
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_protocol.c:1899] connection id:9d561bc2-1ae0-4128-8c0f-dee21f1af90c
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_protocol.c:1883] auth success
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_client.c:100] ***** ai client state 5 -> 6 *****
[13:12:49:191][07-01 13:12:49 ty N][53e][tuya_ai_biz.c:1314] ai biz init success
[13:12:49:193]tkl_system_malloc big memory, size(4624)!
[13:12:49:208]tkl_system_malloc big memory, size(6944)!
[13:12:49:209]tkl_system_malloc big memory, size(8708)!
[13:12:52:809][07-01 13:12:52 ty E][479][uf_flash_file_app.c:338] uf_open netcfg_log err 8
[13:12:56:442]tkl_net_socket_create type(0), fd(4)!
[13:12:57:799][07-01 13:12:57 ty N][479][tuya_devos_utils.c:109] reset dp rate rule finish.
[13:12:57:799]bk_value:0, ty_value:0
[13:12:57:801]bk_value:0, ty_value:0
[13:13:00:453][07-01 13:13:00 ty E][479][tuya_svc_upgrade.c:1005] result null
[13:13:02:279][07-01 13:13:02 ty N][380][tdd_comm_audio.c:394] recv voice wake 00000001
[13:13:02:279][07-01 13:13:02 ty W][380][ty_gfw_ai_input.c:412] Enter
[13:13:02:279][07-01 13:13:02 ty I][380][upload_mgr.c:200] Request input stop, interrupt: true
[13:13:02:279][07-01 13:13:02 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[13:13:02:279][07-01 13:13:02 ty N][380][ty_gfw_ai_input.c:405] wake id: 00000001
[13:13:02:281][07-01 13:13:02 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: IDLE --(WAKEUP)-> WAKEUP_PROMPT
[13:13:02:297][07-01 13:13:02 ty N][380][tdd_comm_audio.c:396] Publish event with code 0
[13:13:02:297][07-01 13:13:02 ty I][54b][upload_mgr.c:277] Input stopped. No frame uploaded to network.
[13:13:02:297]tkl_system_malloc big memory, size(4624)!
[13:13:02:297]tkl_system_malloc big memory, size(6944)!
[13:13:02:298]tkl_system_malloc big memory, size(8708)!
[13:13:02:964][07-01 13:13:02 ty I][529][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP_PROMPT --(LOCAL_PLAY_END)-> WAKEUP
[13:13:03:827][07-01 13:13:03 ty I][380][upload_mgr.c:182] UPLOAD MGR INPUT START.
[13:13:03:841][07-01 13:13:03 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP --(RECORD_START)-> RECORDING
[13:13:03:843][07-01 13:13:03 ty I][54b][upload_mgr.c:233] LOCAL INPUT START!
[13:13:04:443][07-01 13:13:04 ty I][380][upload_mgr.c:200] Request input stop, interrupt: false
[13:13:04:443][07-01 13:13:04 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[13:13:04:443][07-01 13:13:04 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: RECORDING --(RECORD_LOCAL_END)-> NETWORK_TTS
[13:13:04:445][07-01 13:13:04 ty I][54b][upload_mgr.c:257] Uploading buffered frames before stop
[13:13:04:457]tkl_system_malloc big memory, size(20496)!
[13:13:04:851][07-01 13:13:04 ty N][58c][tuya_ai_event.c:85] event id is 670d7cf3-2dce-4d5b-861c
[13:13:04:851][07-01 13:13:04 ty W][54b][upload_mgr.c:148] Duplicated network input stop
[13:13:04:852][07-01 13:13:04 ty I][54b][upload_mgr.c:263] Input Stopped
[13:13:04:863][07-01 13:13:04 ty W][54b][upload_mgr.c:284] handling 2 cmd take 410 ms
[13:13:05:728][07-01 13:13:05 ty I][53e][ty_gfw_ai_input.c:284] STATE_MACHINE: NETWORK_TTS --(NOT_RECOGNIZED)-> WAKEUP_PROMPT
[13:13:05:728][07-01 13:13:05 ty E][53e][tuya_ai_agent.c:708] invalid text data 0x2806d404 0
[13:13:05:730]tkl_system_malloc big memory, size(4624)!
[13:13:05:743]tkl_system_malloc big memory, size(6944)!
[13:13:05:744]tkl_system_malloc big memory, size(8708)!
[13:13:08:785][07-01 13:13:08 ty I][529][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP_PROMPT --(LOCAL_PLAY_END)-> WAKEUP
[13:13:08:950]change config, interval=15, threshold=46, dist=0
[13:13:10:605][07-01 13:13:10 ty I][380][upload_mgr.c:182] UPLOAD MGR INPUT START.
[13:13:10:626][07-01 13:13:10 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP --(RECORD_START)-> RECORDING
[13:13:10:627][07-01 13:13:10 ty I][54b][upload_mgr.c:233] LOCAL INPUT START!
[13:13:11:623][07-01 13:13:11 ty N][380][tdd_comm_audio.c:394] recv voice wake 00000001
[13:13:11:623][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:412] Enter
[13:13:11:624][07-01 13:13:11 ty I][380][upload_mgr.c:200] Request input stop, interrupt: true
[13:13:11:624][07-01 13:13:11 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[13:13:11:624][07-01 13:13:11 ty N][380][ty_gfw_ai_input.c:405] wake id: 00000001
[13:13:11:624][07-01 13:13:11 ty I][380][upload_mgr.c:200] Request input stop, interrupt: true
[13:13:11:625][07-01 13:13:11 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[13:13:11:637][07-01 13:13:11 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: RECORDING --(WAKEUP)-> WAKEUP_PROMPT
[13:13:11:637][07-01 13:13:11 ty N][380][tdd_comm_audio.c:396] Publish event with code 0
[13:13:11:637][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:637][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:639][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:649][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:650][07-01 13:13:11 ty I][54b][upload_mgr.c:277] Input stopped. No frame uploaded to network.
[13:13:11:650]tkl_system_malloc big memory, size(4624)!
[13:13:11:651]tkl_system_malloc big memory, size(6944)!
[13:13:11:652]tkl_system_malloc big memory, size(8708)!
[13:13:11:659][07-01 13:13:11 ty I][54b][upload_mgr.c:277] Input stopped. No frame uploaded to network.
[13:13:11:726][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:727][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:727][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:729][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:738][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:11:848][07-01 13:13:11 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[13:13:12:315][07-01 13:13:12 ty I][529][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP_PROMPT --(LOCAL_PLAY_END)-> WAKEUP
[13:13:13:207][07-01 13:13:13 ty I][380][upload_mgr.c:182] UPLOAD MGR INPUT START.
[13:13:13:224][07-01 13:13:13 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP --(RECORD_START)-> RECORDING
[13:13:13:226][07-01 13:13:13 ty I][54b][upload_mgr.c:233] LOCAL INPUT START!
[13:13:14:514][07-01 13:13:14 ty N][58c][tuya_ai_event.c:85] event id is e95ea75c-d932-4d3d-be36
[13:13:14:533][07-01 13:13:14 ty I][54b][upload_mgr.c:245] BUFFER FULL, NETWORK INPUT START!
[13:13:15:618][07-01 13:13:15 ty I][380][upload_mgr.c:200] Request input stop, interrupt: false
[13:13:15:619][07-01 13:13:15 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[13:13:15:626][07-01 13:13:15 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: RECORDING --(RECORD_LOCAL_END)-> NETWORK_TTS
[13:13:15:711][07-01 13:13:15 ty W][53e][ty_gfw_ai_input.c:297] No handler for state NETWORK_TTS for event RECORD_NETWORK_END
[13:13:15:718][07-01 13:13:15 ty W][54b][upload_mgr.c:148] Duplicated network input stop
[13:13:15:730][07-01 13:13:15 ty I][54b][upload_mgr.c:263] Input Stopped
[13:13:15:731][07-01 13:13:15 ty W][54b][upload_mgr.c:284] handling 2 cmd take 106 ms
[13:13:15:855][07-01 13:13:15 ty I][53e][ty_gfw_ai.c:319] [ ASR ] 明天天气怎么样?
[13:13:17:636][07-01 13:13:17 ty I][53e][ty_gfw_ai.c:330] [ NLG ] 抱歉,
[13:13:18:232][07-01 13:13:18 ty E][53e][tuya_ai_agent.c:708] invalid text data 0x2806d404 0
[13:13:45:529][07-01 13:13:45 ty I][45e][ty_gfw_ai_input.c:284] STATE_MACHINE: NETWORK_TTS --(SLIENCE_TIMEOUT)-> IDLE
[13:14:44:396]tkl_net_socket_create type(0), fd(5)!
[13:14:45:679][07-01 13:14:45 ty N][490][astro_timer.c:407] astro timer is delete
[13:14:49:393][07-01 13:14:49 ty E][670][mqc_app.c:441] MQ 64, Handler idx:3, ret:-6
[13:15:15:676][07-01 13:15:15 ty N][490][tuya_ai_protocol.c:2002] ai ping
[13:15:15:706][07-01 13:15:15 ty N][53e][tuya_ai_client.c:268] ai pong
[13:15:17:076]

Thanks,

fangweng
Posts: 24

Re: 【T3-V-PRO】唤醒后语音交互失败

云端没有下发tts,内部已经安排处理,请稍等

fangweng
Posts: 24

Re: 【T3-V-PRO】唤醒后语音交互失败

智能体没有配音色导致的,请到tuya iot 前台配置

18717770479
Posts: 2

Re: 【T3-V-PRO】唤醒后语音交互失败

语音交互可以了,可是,还没聊上几句话就crash了:
[10:10:46:193][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:193][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:193]tkl_system_malloc big memory, size(4624)!
[10:10:46:193]tkl_system_malloc big memory, size(6944)!
[10:10:46:193]tkl_system_malloc big memory, size(8708)!
[10:10:46:196][07-02 10:10:45 ty I][54b][upload_mgr.c:277] Input stopped. No frame uploaded to network.
[10:10:46:210][07-02 10:10:45 ty I][54b][upload_mgr.c:277] Input stopped. No frame uploaded to network.
[10:10:46:271][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:271][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:272][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:274][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:286][07-02 10:10:45 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:392][07-02 10:10:46 ty W][380][ty_gfw_ai_input.c:563] MIC not open, unexcepted mic data ignored.
[10:10:46:875][07-02 10:10:46 ty I][526][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP_PROMPT --(LOCAL_PLAY_END)-> WAKEUP
[10:10:49:253][07-02 10:10:48 ty I][380][upload_mgr.c:182] UPLOAD MGR INPUT START.
[10:10:49:269][07-02 10:10:48 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: WAKEUP --(RECORD_START)-> RECORDING
[10:10:49:272][07-02 10:10:48 ty I][54b][upload_mgr.c:233] LOCAL INPUT START!
[10:10:50:567][07-02 10:10:50 ty I][54b][upload_mgr.c:245] BUFFER FULL, NETWORK INPUT START!
[10:10:50:579][07-02 10:10:50 ty N][58d][tuya_ai_event.c:85] event id is 17059dd4-d1da-4662-b08f
[10:10:51:768][07-02 10:10:51 ty I][380][upload_mgr.c:200] Request input stop, interrupt: false
[10:10:51:770][07-02 10:10:51 ty I][380][upload_mgr.c:208] UPLOAD MGR INPUT STOP.
[10:10:51:780][07-02 10:10:51 ty I][380][ty_gfw_ai_input.c:284] STATE_MACHINE: RECORDING --(RECORD_LOCAL_END)-> NETWORK_TTS
[10:10:51:866][07-02 10:10:51 ty W][54b][upload_mgr.c:148] Duplicated network input stop
[10:10:51:883][07-02 10:10:51 ty I][54b][upload_mgr.c:263] Input Stopped
[10:10:51:885][07-02 10:10:51 ty W][54b][upload_mgr.c:284] handling 2 cmd take 102 ms
[10:10:52:010][07-02 10:10:51 ty I][55e][ty_gfw_ai.c:319] [ ASR ] 烹饪麻婆豆腐。
[10:10:52:033][07-02 10:10:51 ty N][55e][ty_gfw_ai.c:310] wukong text -> skill code: {"general":{"template":{"version":"1.0"},"data":{}},"code":"searchKnowledge","custom":{"data":{"documents":[{"libCode":"Bfosinnco2us2","itemId":"Kfosjgaumty5y","score":34.23124,"itemType":"KNOWLEDGE","title":"可烹饪菜品","url":"https://qin.tuyacn.com/app-helpcenter/z ... dy":"花菜炒肉片 \n青椒香干炒肉丝 \n酸菜牛肉末 \n腊肉炒芹菜 \n蒜苔炒腊肉 \n孜然羊肉 \n干锅土豆片 \n可乐鸡翅 \n豉油鸡翅 \n油焖大虾 \n酸菜炖大骨 \n排骨炖土豆 \n蒜香排骨 \n麻婆豆腐 \n水煮肉片 \n滑蛋虾仁 \n西红柿炒蛋 \n蒜泥小白菜 \n辣椒豆干 \n清炒茼蒿 \n清炒红菜苔 \n尖椒干豆腐 \n红烧豆腐 \n荠菜炒冬笋 \n干锅花菜 \n芹菜香干炒肉丝 \n韭菜苔炒肉末 \n秋葵炒虾仁 \n西兰花炒虾仁 \n葱爆羊肉 \n辣子鸡 \n糖醋排骨 \n红烧鲈鱼 \n清炖羊肉 \n西红柿土豆炖牛腩 \n糯米CPU0 Current regs:
[10:10:56:183]0 r0 x 0x0
[10:10:56:184]1 r1 x 0x0
[10:10:56:184]2 r2 x 0x13
[10:10:56:184]3 r3 x 0x2
[10:10:56:184]4 r4 x 0x28061574
[10:10:56:184]5 r5 x 0x2806d1b0
[10:10:56:184]6 r6 x 0x44
[10:10:56:184]7 r7 x 0x65
[10:10:56:184]8 r8 x 0x0
[10:10:56:185]9 r9 x 0x2806d1a0
[10:10:56:185]10 r10 x 0x2806daa8
[10:10:56:185]11 r11 x 0x1
[10:10:56:185]12 r12 x 0x65
[10:10:56:185]14 sp x 0x28048f98
[10:10:56:185]15 lr x 0x21d8217
[10:10:56:185]16 pc x 0x211f714
[10:10:56:185]17 xpsr x 0x41100000
[10:10:56:185]18 msp x 0x2809f700
[10:10:56:186]19 psp x 0x28048f30
[10:10:56:186]20 primask x 0x0
[10:10:56:186]21 basepri x 0x0
[10:10:56:186]22 faultmask x 0x0
[10:10:56:186]23 fpscr x 0x0
[10:10:56:186]30 CPU0 xPSR x 0x20000004
[10:10:56:186]31 LR x 0xffffffed
[10:10:56:186]32 control x 0xc
[10:10:56:187]40 MMFAR x 0x0
[10:10:56:191]41 BFAR x 0x0
[10:10:56:211]42 CFSR x 0x82
[10:10:56:211]43 HFSR x 0x0
[10:10:56:211]MemFault
[10:10:56:212]build time => Apr 2 2026 15:03:44 !
[10:10:56:212]***********************************************************************************************
[10:10:56:213]********************************user except handler begin********************************
[10:10:56:213]***********************************************************************************************
[10:10:56:213]MAC_DIAGS/PHY_DIAGS DONE
[10:10:56:213]>>>>MAC PL reg dump begin, reg start=49108000, reg end=4910859c
[10:10:56:213]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:214]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:214]8f 0a 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:214]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4c f1 73 83 00 00 00 00 00 00 00 00
[10:10:56:218]d0 1f f1 80 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:234]00 00 00 00 09 f8 61 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:236]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:236]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:236]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]00 00 10 00 00 00 00 00 00 00 00 00 c0 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]00 00 00 00 c0 dc 06 28 4c 63 02 28 00 00 00 00 4d 44 44 05 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:237]10 00 10 00 00 00 00 00 18 0c 02 28 14 4e 02 28 64 12 02 28 64 12 02 28 18 4e 02 28 14 51 02 28
[10:10:56:240]cc 4e 02 a8 cc 4e 02 a8 04 2b 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:258]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 5e 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:259]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:260]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:260]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[10:10:56:262]00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

详细的日志见附件.

Attachments
20260702-082645.log
crash_log
(2.97 MiB) Downloaded 117 times
fangweng
Posts: 24

Re: 【T3-V-PRO】唤醒后语音交互失败

【T3-V-PRO】唤醒后语音交互失败


知识库里 audio/语音链路的资料够用了(svc_ai_basic 会话文档 + wukong 音频前端条目),可以回答。

结论:这段日志只覆盖了开机第一秒——到 sys_timer 线程刚启动就断了,根本还没走到唤醒和语音交互环节,看不到失败点。唤醒本身成功说明麦克风和本地唤醒(KWS)没问题;「唤醒后交互失败」大概率卡在云端 AI 会话这一段(在线状态 / 授权 / token),需要抓唤醒之后的日志才能定位。

从现有日志能确认的两点:

  • 开头连续的 read_manage_block: magic=0xFFFFFFFF + _judge_ota_info checkerr0:1, checkerr1:1:OTA 管理区两页都是全擦状态,bootloader 直接跳 0x2010000 启动 app。设备能跑起来说明不致命,但全擦烧录可能把授权区(UUID/AUTHKEY)一起擦掉了,这会直接影响后续云端交互
  • WiFi/BLE 初始化正常;[01-01 00:00:00] 只是时间未同步,属正常现象

唤醒 OK 但交互失败,按命中概率排查:

检查项怎么确认
设备是否在线App 里看设备状态,离线则 AI 会话根本建不起来
授权是否还在全擦后需重新授权 + 重新配网激活
AI token 是否过期日志里找 AI_PT_SESSION_STATE_CHANGE,code=1001 为 token 过期,需刷新(出处:components/svc_ai_basic/README_CN.md
PID 能力平台侧确认该 PID 已开通 AI 语音能力

语音交互的链路和容易断的位置:

Image

下一步:重新抓一次串口日志,从唤醒前 10 秒开始抓,重点看唤醒之后带 ai_bizsessiontokenasrwukong 关键字的行——真实报错在那里,不在开机日志里。


以上内容由 AI 自动分析生成,如有疑问请回复补充。

Post Reply