Virtual ID of USB: bf14bbc48260f64a07aoqj and bf417513b7eb01d16aamrc
Virtual ID of Moes Hub: bfdd385cadc34fdb76jlx7
If possible to expose it through matter bridge. Thank you.
Video:
If it possible to expose it as three separate on/off switches plus default relay status for these switches after power outage.
Update: relay status is weird because in tuya app you can turn on/off all of them with one click or you can do this separately for each of one and relay status looks like being set up for the main on/off switch.
Thank you.
Hello, regarding your three questions: Aqara U200 Smart Lock, Relay not exposed by Matter Bridge, and USB Zigbee not exposed by Matter Bridge, I will consolidate my response in this post.
When I checked the device logs on the platform today, I found they had been overwritten due to the extended time period.
Could you please unbind the sub-devices mentioned in the post and rebind them? There's no need to rebind the gateway. Then, please let me know the exact time you started rebind the first device and their new IDs. I'll try my best to obtain valid logs promptly for analysis. Thank you for your patience.
fangping.guo 2025年 Dec 5日 11:41Hello, regarding your three questions: Aqara U200 Smart Lock, Relay not exposed by Matter Bridge, and USB Zigbee not exposed by Matter Bridge, I will consolidate my response in this post.
When I checked the device logs on the platform today, I found they had been overwritten due to the extended time period.
Could you please unbind the sub-devices mentioned in the post and rebind them? There's no need to rebind the gateway. Then, please let me know the exact time you started rebind the first device and their new IDs. I'll try my best to obtain valid logs promptly for analysis. Thank you for your patience.
Same moes hub virtual ID: bfdd385cadc34fdb76jlx7
Relay new virtual ID is: bf14bd71f8f44ccd9e3qjd8
USB ZigBee new virtual ID is: bf493e378cf5f6e7c2bhpk
Aqara U200 new virtual ID is: bf9d4etolw6vjeik
Logs uploaded just now:
Thank you.
I successfully retrieved the gateway logs, but the information you provided—Relay new virtual ID is: bf14bd71f8f44ccd9e3qjd8—is incorrect. This device does not exist.
The 3CH Zigbee USB Switch Module ZTU 6 was activated on 2025-12-07 16:51:29, but the logs you provided only start from 12-07 17:37:03:512. Please unbind and rebind these two devices.
fangping.guo 2025年 Dec 8日 09:51I successfully retrieved the gateway logs, but the information you provided—Relay new virtual ID is: bf14bd71f8f44ccd9e3qjd8—is incorrect. This device does not exist.
Virtual ID: bfaf1fbee09e2716e0inoy
fangping.guo 2025年 Dec 8日 10:13The 3CH Zigbee USB Switch Module ZTU 6 was activated on 2025-12-07 16:51:29, but the logs you provided only start from 12-07 17:37:03:512. Please unbind and rebind these two devices.
Virtual ID: bf903026c6c27d519anmio
Aqara U200: bf617f3mweuzanow
I see the new log. Has the device now appeared as successfully bridged? I haven't yet identified why these two devices couldn't bridge, and I'm continuing to analyze the issue. If it's convenient for you, please try resetting the Tuya Matter gateway first and then attempt the process again.