I have connected Aqara Hub M3 (bf1fe5ft0yjaf7vo) over matter to Tuya Smart Wired Zigbee Gateway Pro (bfab35ba8cabc42935qf5z)
Some Aqara devices have appeared
Aqara Water Leak Sensor T1 bf16d4218df99ff01ex24v
Color Light bf24d8e81cf3124935suvu
Occupancy Sensor bf536abda59a5707bebk95
Occupancy Sensor 2 bfd4566f18808d4a125j3i
Aqara Temp/Humidity Sensor bff4028bed89fc7f07dx8u
But no one have any info or control
Please provide the version of the app and the current panel status on your device (if possible, please attach the screenshot), thank you.
Tuya Smart App version is 6.5.0 (international)
Something changed and devices appeared with some pictures and info
Devices in Aqara Home App
Tuya Smart Aqara devices
Aqara Temperature and Humidity sensor
you can update the gateway to version 1.13.4, then test again.thanks
Nothing have changed.
I saw that the device displayed some information on the tuya app. Please describe your problem in more detail.thanks
I have also connected the Aqara M3 hub to Smart Life app and it seems to have picked up multiple motion sensors with no motion state, just shows Inductive status - Close/Open. There are some nu-supported devices, and the only sensor that is working seems to be the contact sensor. However the state of the contact sensor is inverted, and also went offline whilst testing.
Please investigate as this will be a huge success if other hubs are supported in Smart Life App, thanks.
Aqara M3 hub - bf227dc137svl4yy
Smart Life App v6.6.3
Zemismart M1 hub - bfcd42b27430a853939ww9
Motion sensor - bfbbfd75d434446d92ascs
Contact sensor - bf193cea3136351377kncc - state is inverted/reversed!