T5 配置7寸 RGB888的屏问题

[luoxiaowei]

目前使用了7寸 RGB888的屏，参考文档 https://developer.tuya.com/cn/docs/deve ... guxsj4txq9
使用 LCD 适配：通过 RGB 接口方式来修改屏驱动
目前看log驱动加载了，但是只有背光亮，屏无显示，请问下目前GPIO的配置只有下面这些，是否是正常的？还需要哪些地方调整？

void tuya_board_lcd_init(TKL_DISP_INFO_S *lcd)
{
lcd->ll_ctrl.power_ctrl_pin = TUYA_GPIO_NUM_MAX;
lcd->ll_ctrl.power_active_level = TUYA_GPIO_LEVEL_HIGH;
lcd->ll_ctrl.rgb_mode = TKL_DISP_PIXEL_FMT_RGB888;

Code: Select all

lcd->ll_ctrl.bl.io              = TUYA_GPIO_NUM_9;
lcd->ll_ctrl.bl.mode            = TKL_DISP_BL_GPIO;
lcd->ll_ctrl.bl.active_level    = TUYA_GPIO_LEVEL_HIGH;

lcd->ll_ctrl.rst_pin            = TUYA_GPIO_NUM_6;
lcd->ll_ctrl.rst_active_level   = TUYA_GPIO_LEVEL_LOW;

}