2 scene switch functionally not showing in Home Assistant

[Shannonyo]

Hello,

I have a Zenismart m1 hub: bffd78e06427157329vglw

And moes 2 scene switch: bfc6bea6fed37bbab0djig

I have added it to Home Assistant, but I am only able to view a single event for button press. Both buttons trigger the same event and there is no way to distinguish between them. There is also no way to determine when the button is held down.

[Shannonyo]

Hey just wondering if you needed any more info for this?

[Shannonyo]

Hi, would love some help with this as it makes the switches unusable at controlling two different lights.
ID for switches:
bff667907bef6c1d5ejt9y
bfc6bea6fed37bbab0djig
bfa36c70fda29ff72arakh

[qiusui]

Sorry to keep you waiting, this is an Apple feature, is not supported.

[huangxh]

Hello,

I have a Zenismart m1 hub: bffd78e06427157329vglw

And moes 2 scene switch: bfc6bea6fed37bbab0djig

I have added it to Home Assistant, but I am only able to view a single event for button press. Both buttons trigger the same event and there is no way to distinguish between them. There is also no way to determine when the button is held down.

We report according to the standard Matter buttons, and there is a distinction. We have tested it on Apple, and different buttons trigger different interactions, so we can prove that there is a distinction. If there is a problem on HA, have you tried other platforms to see if there are any issues?
thanks

[huangxh]

Hi, would love some help with this as it makes the switches unusable at controlling two different lights.
ID for switches:
bff667907bef6c1d5ejt9y
bfc6bea6fed37bbab0djig
bfa36c70fda29ff72arakh

As shown in the picture, this is the scenario we tested on Apple HomeKit, which has multiple buttons.

[Shannonyo]

Hi,

Sorry for my late reply, I was having issues with my home assistant setup and haven't had time to retest until now. Unfortunately the matter server running on my raspberry pi is the only matter hub I have access to.

I have confirmed there is still only 1 button showing up on home assistant, but I will try and do some more troubleshooting as it might be an issue with my matter server setup, since it's confirmed working on home kit.