I have successfully updated the Bridge firmware as suggested. During the update I lost all the bridged devices in SmartThings. A SmartThings reboot brought the devices back with new names again breaking my automations.
I am not at the site where the Bridge is located, so I can not do any further testing at this time. The next time I am on site I will do more testing and report back.
I have successfully updated the Bridge firmware as suggested. During the update I lost all the bridged devices in SmartThings. A SmartThings reboot brought the devices back with new names again breaking my automations.
I am not at the site where the Bridge is located, so I can not do any further testing at this time. The next time I am on site I will do more testing and report back.
Thanks again for your help.
Sorry, pls test the new version. if the issue still exist, pls tell me with the time. thanks
The firmware update that you pushed seemed to fix the problem. I have done 3 Moes Matter Bridge reboots and have not lost any devices in SmartThings since that update.
Thanks again for your prompt help.
I posted at the top of this thread what my problem was and when I got up the next morning I had a reply. It said to update the firmware. I said to my self how I am going to go that. So I opened the Tuya app, went to the Bridge, then the settings page and there was a note that said the firmware needed a manual update and there was an active update button. That button was not there the night before. I used the button and the update solved the problem.
If I were you I would start a new thread with your problem and see if they respond.